For 24/7 emergency support

Condo Pot Light Installation in Toronto: A Kitchen, Start to Finish

Row of new pot lights in an Etobicoke condo kitchen

New pot lights in a condo kitchen, from the first layout line to lights on. This job in an Etobicoke condo shows how we lay the lights out, protect the kitchen while we work, and leave the place clean.

The job

The owner wanted new pot lights in the kitchen of their Etobicoke condo and supplied the LED pot lights themselves. Our part was the new wiring and the installation, done under an ESA permit.

What we did, step by step

  1. Checked above the ceiling. We looked at the space above the ceiling. In a condo, what’s up there decides where the lights can go and how the wiring gets to them.
  2. Laid them out in a straight line. We marked the layout across the ceiling with a laser line, so the lights would sit in one straight row.
  3. Cut the holes. Then we cut the holes along that line.
  4. Kept the kitchen covered. The cabinets and appliances stayed wrapped in plastic the whole time we worked.
  5. Wired and installed the lights. We ran the new wiring and installed the owner’s pot lights. The lights came on with the kitchen still under plastic.
  6. Plastic off, clean up. Once the lights were working, the plastic came off and we cleaned up. The finished kitchen has a straight row of pot lights running toward the balcony windows.

From layout to lights on, the work was done the same day.

Why the prep matters in a condo

Cutting holes in a ceiling makes dust, and in a condo kitchen there’s nowhere for it to go but onto the counters and appliances. Wrapping them before the first cut keeps the dust off the surfaces you use every day.

The layout matters just as much. Once a hole is cut, moving a pot light means patching the ceiling, so the line is worth getting right first.

New wiring needs an ESA permit in Ontario, and we took care of it on this job. If you live in a condo, it’s also worth checking your building’s rules for renovation work before you book.

When to call

  • You want pot lights added to a condo kitchen or living area.
  • You’ve already bought your own fixtures and need them wired and installed.
  • You’re renovating and want the lighting planned before the ceiling work starts.

Our pot light installation guide covers layout, insulation, wiring and dimmers in more detail. You can also read about our lighting solutions and our work as electricians in Etobicoke.

FAQ

Can you install pot lights in a condo?

It depends on what’s above the ceiling, so that space gets checked as part of the job. In this Etobicoke condo, the new lights went in along one straight row across the kitchen.

How do you keep the dust and mess down?

We cover what you don’t want dusty before we start. In this kitchen, the cabinets and appliances stayed wrapped in plastic until the lights were working. Then the plastic came off and we cleaned up.

How long does it take?

It depends on the number of lights and what’s above the ceiling. This kitchen went from layout to lights on the same day.

Planning pot lights?

Murtex Electric Inc. is a licensed electrical contractor (ESA/ECRA licence 7016854) led by a Master Electrician, serving Toronto and surrounding areas.

Call or text (647) 529-2972, or request a quote online.

Other Articles

Get Your Quote Today!

Fill out the form below and one of our team members will get back to you within 24 hours.

Modern home entrance with exterior pot lights and landscape lighting
Murtex Electric Inc. is a BBB Accredited Business with an A+ rating - view our BBB business profile
BBB Accredited Business · A+ Rating
Licensed Electrical Contractor · ECRA/ESA #7016854 · ESA Pre-Authorized
100% ESA inspection passing rate over the past 2 years