The owners told us they had wired this panel themselves, and that it was just temporary. It was a very illegal, dangerous and unsafe setup, so we ended up disconnecting it. Temporary wiring is still live power. Here’s the call in about half a minute.
The job
It started as a service call at the office of an industrial yard: some of the plugs weren’t working. Our part was to find out why.
What we found, step by step
- Tested the plugs. We started with a plug tester in the plugs that weren’t working.
- Asked who connected it. At the panel, the owners told us they had done it themselves, and that it was just temporary.
- Called it what it was. “You can’t do it like this,” we told them. “It’s illegal.”
- No quick fix. The owners wanted us to “fix” improper, unlicensed work, and asked if another wire would do it. It wouldn’t: it needed a whole different setup.
- Disconnected it. Someone could get killed like this, so we ended up disconnecting it.
- Priced the proper setup. We gave the owners a price to have their trailer connected properly, to ESA standards and the Ontario Electrical Code.
Temporary wiring is still live power
Just because it’s temporary, it doesn’t make it OK. A wire doesn’t know it’s temporary. While it’s connected, it’s live, and a bad connection can shock someone or start a fire whether it was meant to stay for a week or for years.
That’s also why another wire wasn’t the answer here. Adding to a setup that’s wrong from the start doesn’t make it safe. It needs a different setup, done properly.
If you need power for a short time, that’s still electrical work. In Ontario, it’s work for a licensed electrical contractor, with an ESA permit where required. Our post on why electrical code compliance matters covers DIY and unlicensed work, and what ESA inspections are for.
Always hire a licensed electrical contractor
In Ontario, anyone you hire for electrical work must be a Licensed Electrical Contractor, with an ESA permit where required. Unlicensed electrical work is illegal, temporary or not. “Doing it now and getting it checked later” doesn’t make it legal or safe.
- Any electrical work, even “just for now”. Temporary power is still electrical work.
- Anything inside your panel. Only a licensed contractor should open it or add to it.
- Plugs or lights that stop working and you don’t know why.
- If unlicensed work was already done: stop using it and call a licensed contractor to make it safe and do it properly.
Need work at a yard, an office or a warehouse? See our commercial electrical services. If your panel needs work, our panel and service upgrades page explains how we handle it.
FAQ
Temporary power is a normal part of some jobs, like construction sites, but it still has to be done properly. In Ontario, it’s work for a licensed electrical contractor, with an ESA permit where required. Calling a setup temporary doesn’t change that. The one in this post was illegal, so we disconnected it.
Because it wasn’t safe to leave it connected. Our words on the spot were “someone can get killed like this.” The owners wanted us to “fix” improper, unlicensed work and asked if another wire would do it, but patching it wouldn’t have made it safe. It needed a whole different setup.
No. Unlicensed electrical work is illegal, and checking it afterwards doesn’t change that. Hire a Licensed Electrical Contractor from the start, so the work is done to the Ontario Electrical Safety Code with an ESA permit where required. If unlicensed work was already done, stop using it and call a licensed contractor to make it safe and redo it properly.
Hire a licensed electrician
Murtex Electric Inc. is a licensed electrical contractor (ESA/ECRA licence 7016854) led by a licensed Master Electrician who has 13+ years of total experience in the electrical trade. We take care of ESA permits where required, across Toronto and the GTA.
Call or text (647) 529-2972, or request a quote online.
